Lenox 4049NEC12127 Band Saw Blade Coil 18 Tpi 1/2 in

Product Description

The LENOX 4049NEC12127 is a band saw blade coil stock designed for continuous cutting operations across metal fabrication, mechanical trades, and general-purpose sawing applications. The coil supplies 100 feet of 1/2-inch-wide, 0.025-inch-thick carbon steel blade material with a constant-pitch, 18-tooth-per-inch (TPI) configuration and a raker tooth set. The hard back construction resists blade flex and maintains straight tracking under load. This coil format allows shops and field technicians to cut custom blade lengths for a range of band saw frame sizes, reducing inventory overhead compared to pre-welded loop blades.

This coil stock is suited for light-to-medium-duty contour cutting in residential and commercial mechanical trade environments, including HVAC pipe and sheet metal cutting, plumbing rough-in work, and general fabrication. The 18 TPI constant-pitch geometry delivers a smooth finish cut on thin-wall tubing, conduit, and similar materials. The raker set pattern clears chips efficiently in straight and contour passes. Technicians weld or pin-join cut lengths on-site to fit specific band saw frames.

Key Features

• 100-foot coil provides multiple custom-length blades from a single stock unit
• 18 TPI constant-pitch tooth pattern for smooth cuts on thin-wall and light-gauge material
• Raker tooth set for efficient chip clearance in contour and straight cuts
• Hard back construction maintains blade rigidity and straight tracking under load
• Carbon steel construction suited for general-purpose cutting in trade applications
• Straight tooth form with toothed cutting edge for consistent stock removal

Compatibility

Designed as a general-purpose band saw blade coil stock compatible with band saw frames that accept 1/2-inch-wide blades welded or joined to the required loop length.

Installation Notes

A licensed or qualified technician should cut and weld blade lengths using a blade welder appropriate for 0.025-inch carbon steel stock. Power down and lock out the band saw before installing or removing any blade. Verify the finished loop length and blade tension setting against the band saw manufacturer specifications before cutting. Wear appropriate hand and eye protection when handling and cutting coil stock.