Lenox 39559CLB103050 Bandsaw Blade 10 Ft 6-8 Tpi Bi-metal

Product Description

The LENOX 39559CLB103050 is a welded bi-metal bandsaw blade built for cutting a wide range of metals in professional shop and fabrication environments. It measures 10 feet in length and 3/4 inch in width, with a 0.035 inch thickness and a variable pitch of 6 to 8 TPI. The tooth material is M42 high speed steel set in a Vari-Raker pattern, which helps reduce vibration and chip load across varying material thicknesses. The spring steel back provides flexibility and fatigue resistance during continuous cutting cycles. This blade is suited for metalworking trades including maintenance machinists, fabricators, and tool room technicians.

This blade is designed for use on horizontal and vertical metal-cutting bandsaws in production and job shop settings. Its variable pitch tooth form and positive rake angle make it effective on structural steel, alloy steel, carbon steel, stainless steel, tool steel, aluminum, and other non-ferrous metals. The Vari-Raker tooth set minimizes blade noise and extends service life when cutting solid bar stock, tubing, and structural sections. The Classic series designation positions this blade as a general-purpose workhorse for shops that cut a mixed inventory of metal types and sizes.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back
• Variable pitch 6 to 8 TPI with Vari-Raker tooth set for reduced vibration and smoother cuts
• Positive rake angle improves cutting efficiency on hard and abrasion-resistant metals
• 0.0580 inch kerf width minimizes material waste per cut
• Toothed, milled, and variable cutting edge style suits a broad range of cross-sections
• Compatible with stainless steel, alloy steel, carbon steel, tool steel, aluminum, and non-ferrous metals

Compatibility

Designed as a replacement or stock blade for metal-cutting bandsaws accepting a 10-foot, 3/4 inch wide welded loop blade. Suitable for cutting alloy steel, aluminum, non-ferrous metal, carbon steel, stainless steel, structural steel, and tool steel workpieces.

Installation Notes

Blade installation and tensioning should be performed by a qualified machinist or fabricator following the bandsaw manufacturer's service documentation. Power down and lockout the machine before changing blades. Verify blade tension, tracking, and guide bearing clearance after installation before resuming cuts. Always wear cut-resistant gloves when handling bandsaw blades.