Lenox 39415CLB134115 Bandsaw Blade 162 in 6-8 Tpi Bi-metal

Product Description

The LENOX 39415CLB134115 is a welded bi-metal bandsaw blade designed for continuous cutting of metal stock on stationary band saw machines. It measures 162 inches (13 feet 6 inches) in length and 1-1/4 inches in width, with a 0.042-inch body thickness and a kerf width of 0.068 inches. The blade uses a variable-pitch tooth form at 6 to 8 TPI with a vari-raker tooth set and a positive rake angle. The cutting teeth are M42 high speed steel, and the back is spring steel construction. This blade is installed by metalworking professionals and maintenance machinists in industrial and commercial shop environments.

This blade is suited for cutting a broad range of metals including carbon steel, alloy steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch pattern reduces vibration and harmonics during the cut, making it a practical choice for interrupted cuts, bundle cutting, and varying cross-sections. It is part of the LENOX Classic series and is intended for use on band saws that accept a 162-inch blade loop.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back for durability and flex resistance
• Variable pitch at 6 to 8 TPI with vari-raker tooth set reduces vibration and extends blade life on varied workpieces
• Positive rake angle promotes aggressive, efficient cutting on both ferrous and non-ferrous metals
• 0.068-inch kerf width minimizes material loss per cut
• Welded loop construction at 162 inches long by 1-1/4 inches wide fits standard mid-size metal-cutting band saws
• LENOX Classic series — designed for general-purpose industrial metal cutting applications

Compatibility

Designed as a replacement or consumable bandsaw blade for stationary metal-cutting band saws that accept a 162-inch (13 feet 6 inches) blade loop, 1-1/4 inches wide, with 0.042-inch blade thickness.

Installation Notes

Bandsaw blade installation and tensioning should be performed by a qualified machinist or maintenance technician with the machine powered down and locked out per OSHA lockout/tagout procedures. Wear cut-resistant gloves when handling the coiled or looped blade. Verify that wheel guides, blade guards, and blade tension are set according to the band saw manufacturer specifications before resuming operation. Do not run the blade above the feed rate or speed range recommended for the material being cut.