Lenox 34151CLB134115 Welded Bandsaw Blade 6-8 Tpi

Product Description

The LENOX 34151CLB134115 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. It measures 13 feet 6 inches in length and 1 inch in width, with a blade thickness of 0.035 inches and a kerf width of 0.058 inches. The variable-pitch tooth form runs at 6 to 8 TPI, reducing harmonic vibration and improving cut quality across a range of workpiece cross-sections. High speed steel M42 teeth are electron-beam welded to a spring steel back, combining edge hardness with body flexibility. This blade is installed by machinists, fabricators, and maintenance technicians operating vertical or horizontal band saws in production and job-shop environments.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and other non-ferrous metals. The variable Vari-Raker tooth set is particularly effective on structural shapes, solid rounds, and bundles where consistent chip clearance and reduced blade loading are priorities. It is sold as a single blade and fits band saws accepting a 13-foot 6-inch loop.

Key Features

• Bi-metal construction: M42 high speed steel teeth bonded to a spring steel back for durability and flex resistance
• Variable pitch at 6 to 8 TPI reduces vibration and noise during cut
• Vari-Raker tooth set promotes consistent chip evacuation across varied cross-sections
• Positive rake angle improves cutting aggression on tough metals including stainless and tool steel
• 0.058-inch kerf width minimizes material loss per cut
• Welded loop construction rated for the LENOX Classic series platform

Compatibility

Designed as a replacement or production-stock bi-metal bandsaw blade for band saws accepting a 13-foot 6-inch blade loop that is 1 inch wide and 0.035 inches thick.

Installation Notes

Blade installation should be performed by a qualified machinist or maintenance technician with the saw fully de-energized and locked out per OSHA lockout/tagout procedures. Verify wheel guides, blade tension, and tracking alignment before resuming operation. Wear cut-resistant gloves when handling the blade loop. Do not exceed the saw manufacturer's rated blade speed for the material being cut.