Lenox 28467RPB123660 Bi-metal Bandsaw Blade 12 Ft

Product Description

The LENOX 28467RPB123660 is a welded bi-metal bandsaw blade engineered for professional cutting applications in metalworking and fabrication environments. The blade measures 12 feet in length and 1-1/4 inches wide, with a 0.042-inch blade thickness and a variable pitch of 4 to 6 teeth per inch (TPI). The tooth material is M42 high speed steel, bonded to a spring steel back for resilience under continuous cutting loads. The Vari-Set tooth set and positive rake angle work together to reduce vibration and improve cut quality on a range of workpiece profiles. This blade is part of the LENOX RX Plus series and is sized for industrial bandsaw equipment used by metalworking professionals and skilled tradespeople.

This blade is suited for production cutting environments where variable pitch geometry reduces harmonics and extends blade life on structural sections, solid bar stock, and bundled materials. The bi-metal construction handles interruptions and mixed material profiles that would wear out carbon steel blades prematurely. The 12-foot welded loop fits horizontal and vertical bandsaws commonly found in fabrication shops, mechanical contractors, and pipe and structural steel operations. The milled toothed edge delivers consistent kerf geometry across the full blade life cycle.

Key Features

• Variable pitch 4 to 6 TPI reduces vibration and harmonics on structural and solid stock
• M42 high speed steel teeth offer superior heat and wear resistance over standard M2 grades
• Vari-Set tooth set with positive rake angle improves chip evacuation and cut rate
• Spring steel back provides flexibility and fatigue resistance over extended run time
• Welded loop construction in 12-foot length fits standard industrial bandsaw wheels
• Milled toothed cutting edge delivers uniform kerf width of 0.068 inches

Compatibility

Designed as an OEM-style replacement or direct-fit blade for industrial bandsaws accepting a 12-foot, 1-1/4-inch wide blade in bi-metal configuration. Verify wheel diameter and blade guide spacing on the specific saw before installation.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician familiar with blade tensioning procedures for the specific saw model. Power down and lock out the bandsaw before removing the existing blade or installing the new one. Wear cut-resistant gloves when handling the coiled blade, as the teeth present a laceration hazard during uncoiling. Follow the saw manufacturer guidelines for blade tension, guide bearing clearance, and break-in cutting speed before running the blade at full feed rate.