Lenox 28283RPB154775 Bi-metal Bandsaw Blade 4-6 Tpi

Product Description

The LENOX 28283RPB154775 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. Measuring 15 feet 8 inches in length and 1-1/4 inches wide at 0.042 inches thick, this blade is part of the LENOX RX Plus series and features M42 high-speed steel teeth bonded to a spring steel back. The variable 4 to 6 TPI pitch pattern reduces vibration and harmonic noise during the cut, which extends blade life and improves surface finish on structural and solid stock. Installers working in metal fabrication, mechanical contracting, and maintenance shops are the primary users of this blade.

This blade is suited for straight and contour-free cutting of ferrous and non-ferrous metals in industrial and commercial settings. The Vari-Set tooth set and positive rake angle work together to deliver fast, consistent chip evacuation on a range of material cross-sections. A milled, toothed cutting edge provides a controlled kerf of 0.0680 inches, minimizing material waste on costly stock. Typical applications include structural steel cutting, pipe and tube work, and solid bar stock operations where consistent feed rates are required.

Key Features

• RX Plus series bi-metal construction with M42 high-speed steel teeth for extended cutting life
• Variable 4 to 6 TPI pitch reduces vibration and noise during the cut
• Spring steel back provides flexibility and resistance to blade fatigue
• Positive rake angle and Vari-Set tooth geometry improve chip clearance and feed rate
• Milled toothed edge delivers a precise 0.0680-inch kerf width
• Welded construction for a continuous, balanced loop with no joint weak points

Compatibility

Designed as an OEM-style replacement or direct-fit blade for horizontal and vertical bandsaw machines that accept a 15 feet 8 inches by 1-1/4 inches blade configuration.

Installation Notes

Bandsaw blade installation and tensioning should be performed by a qualified technician following the machine manufacturer's guidelines. Disconnect and lock out power to the saw before removing or installing any blade. Confirm wheel guides, thrust bearings, and blade tracking are properly adjusted after mounting to prevent premature blade wear or breakage. Always use appropriate personal protective equipment, including cut-resistant gloves, when handling bandsaw blades.