Lenox 27944RPB164875 Bandsaw Blade 16 Ft 4-6 Tpi Bi-metal

Product Description

The LENOX 27944RPB164875 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. It measures 16 feet in length and 1-1/4 inches in width, with a blade thickness of 0.042 inches and a kerf width of 0.068 inches. The blade features a variable 4 to 6 TPI tooth configuration with a positive rake angle and Vari-Set tooth set, promoting chip clearance and reduced vibration during cuts. The M42 high-speed steel tooth material delivers hardness retention at elevated temperatures, making this blade well suited for production cutting environments where blade life and cut quality are priorities. Installation and blade changes are performed by machine operators and maintenance technicians on bandsaw equipment.

This blade is designed for use on horizontal and vertical metal-cutting bandsaws accepting a 16-foot blade loop. The variable pitch tooth form reduces harmonics and chatter, which is particularly useful when cutting structural shapes, tubing, and solid bar stock in steel, stainless steel, and other ferrous metals. The RX Plus series designation places this blade in a performance tier suited for continuous-duty shop environments, production floors, and fabrication operations where consistent cut quality is required across varying cross-sections and material hardnesses.

Key Features

• Bi-metal construction with M42 high-speed steel teeth bonded to a spring steel back for flexibility and edge retention
• Variable 4 to 6 TPI pitch with Vari-Set tooth set reduces vibration and extends blade life across varying workpiece cross-sections
• Positive rake angle promotes aggressive, efficient cutting on ferrous metals and structural shapes
• 0.068-inch kerf width and 0.042-inch blade thickness minimize material loss per cut
• Welded construction provides a continuous loop ready for immediate installation on compatible bandsaws
• RX Plus series designation indicates suitability for high-cycle production and continuous-duty cutting applications

Compatibility

Designed as an OEM-style replacement or direct-fit blade for metal-cutting bandsaws accepting a 16-foot welded blade loop with a 1-1/4-inch blade width.

Installation Notes

Blade installation and tensioning should be performed by a qualified machine operator or maintenance technician following the bandsaw manufacturer's recommended procedures. Always power down and lock out the bandsaw before removing or installing a blade. Use proper blade-handling gloves when coiling or uncoiling the welded loop, as the tooth edge presents a laceration hazard. Verify blade guides, thrust bearings, and wheel alignment before returning the machine to service.