Lenox 27429RPB134115 Bandsaw Blade 162 in 3-4 Tpi Bi-metal

Product Description

The LENOX 27429RPB134115 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in industrial and fabrication environments. Measuring 162 inches in total length and 1-1/4 inches wide, this blade features a variable-pitch tooth form with a 3 to 4 TPI range that helps reduce vibration and harmonic resonance during cutting. The M42 high-speed steel tooth tips are bonded to a spring steel back, combining edge retention with fatigue resistance. At 0.042 inches thick with a kerf width of 0.070 inches, the blade delivers controlled cuts with minimal material loss. Licensed millwrights, maintenance technicians, and metal fabricators are the primary installers and users of this blade type.

This blade is designed for straight and structural cutting on horizontal and vertical bandsaw machines sized to accept a 162-inch blade. It is suited for cutting ferrous metals, structural steel, pipes, solid bar stock, and similar hard materials in production shops, maintenance facilities, and fabrication yards. The variable pitch tooth pattern makes it a practical choice when cutting a range of stock sizes without changing blades. Contour cutting is not an intended application for this blade.

Key Features

• M42 high-speed steel teeth for extended cutting life in ferrous and hard metals
• Variable-pitch 3 to 4 TPI tooth form reduces vibration and improves surface finish
• Vari-Set tooth set pattern distributes cutting load and resists blade deflection
• Spring steel back provides flexibility and fatigue resistance over extended run time
• 0.042-inch blade thickness with 0.070-inch kerf for efficient material removal
• Positive rake angle improves chip evacuation and cutting aggression on dense stock

Compatibility

Designed for bandsaw machines that accept a 162-inch welded blade with a 1-1/4-inch width. Verify your machine's blade length specification, wheel diameter, and guide clearance before installation.

Installation Notes

Blade installation and tensioning should be performed by a qualified technician familiar with bandsaw equipment. Always disconnect power to the saw and release blade tension fully before removing or installing a blade. Use appropriate blade tension settings as specified by the saw manufacturer for the blade width and material being cut. Inspect blade guides, thrust bearings, and wheel tires for wear before mounting a new blade.