Lenox 19236RPB144470 Bi-metal Bandsaw Blade 4-6 Tpi

Product Description

The LENOX 19236RPB144470 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. Part of the RX Plus series, it measures 14 feet 8 inches in length and 3/4 inch in width with a blade thickness of 0.035 inches. The tooth edge is manufactured from M42 high speed steel set in a spring steel back, combining flexibility with edge retention. The variable pitch tooth form runs at 4 to 6 TPI with a positive rake angle and Vari-Set tooth set, making it well-suited for cutting a range of material thicknesses in a single blade. Licensed metalworking technicians and millwrights are the primary installers of this blade type.

This blade is designed for stationary bandsaw machines in industrial, production, and job-shop environments. The variable 4 to 6 TPI pattern is effective on structural steel, tubing, solid bar stock, and other ferrous and non-ferrous materials where a single-pitch blade would chatter or bind. It is not designed for contour cutting. The RX Plus series targets high-volume cutting operations where blade life and consistent kerf quality are priorities. The kerf width measures 0.0580 inches, supporting close-tolerance cutoff work.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back for extended blade life
• Variable pitch tooth form at 4 to 6 TPI reduces vibration and chatter across varying material cross-sections
• Positive rake angle promotes aggressive feed rates on structural and solid stock
• Vari-Set tooth set pattern distributes cutting forces evenly to minimize tooth strippage
• Kerf width of 0.0580 inches supports precise, repeatable cutoff dimensions
• Welded construction provides a continuous loop without joints that can cause premature blade failure

Compatibility

Designed as an OEM-style replacement welded bandsaw blade for stationary horizontal and vertical bandsaws accepting a 14-foot 8-inch blade loop with a 3/4-inch width and 0.035-inch blade thickness.

Installation Notes

Blade installation should be performed by a qualified metalworking technician or millwright with the bandsaw fully de-energized and locked out per OSHA lockout/tagout procedures. Confirm wheel diameter, blade width capacity, and blade length specification on the machine before fitting. Blade tension should be set according to the bandsaw manufacturer's specifications for 3/4-inch bi-metal blades. Wear cut-resistant gloves when handling the uncoiled blade loop.