Lenox 1860351 Welded Bandsaw Blade 6 Tpi Carbon Steel

Product Description

The LENOX 1860351 is a welded bandsaw blade manufactured from carbon steel, designed for continuous cutting operations on bandsaw machines used in metalworking, pipefitting, and mechanical trades. The blade runs 194 inches in length and 1/4 inch in width, with a 0.025-inch thickness and a 6 teeth-per-inch (TPI) tooth pattern. The flexible back type reduces fatigue cracking during operation, and the toothed cutting edge delivers consistent material removal. This blade is installed by pipefitters, HVAC technicians, and general mechanical trades who rely on bandsaws for cutting metal pipe, conduit, and structural stock.

This blade suits horizontal and vertical bandsaw machines used in commercial and industrial shop environments, as well as field service applications where portable bandsaws are used. The 6 TPI tooth pitch is appropriate for cutting medium-thickness ferrous and non-ferrous metals, including pipe, tubing, and bar stock. The welded construction creates a continuous loop for reliable blade tracking. Packaged as a single blade per unit.

Key Features

• 194-inch overall blade length fits standard bandsaw machines requiring this loop size
• 1/4-inch blade width suitable for contour and straight cuts
• 0.025-inch blade thickness for reduced kerf and material waste
• 6 TPI tooth pattern optimized for medium-thickness metal cutting
• Carbon steel blade and tooth material for cost-effective general-purpose use
• Flexible back type resists fatigue and extends blade service life

Compatibility

Designed as a replacement welded bandsaw blade for bandsaw machines that accept a 194-inch loop blade measuring 1/4 inch wide with 0.025-inch thickness. Verify machine blade length, width, and thickness specifications before installation.

Installation Notes

Bandsaw blade installation should be performed by qualified technicians following the bandsaw manufacturer's procedures. Disconnect and lock out power to the machine before removing the old blade or installing the new one. Wear cut-resistant gloves when handling the blade. Confirm proper blade tension and tracking alignment before resuming operation.