Lenox 1793122 Welded Bandsaw Blade 5 to 8 Tpi Bi-metal

Product Description

The LENOX 1793122 is a welded bi-metal bandsaw blade designed for metal-cutting bandsaws in demanding industrial and shop environments. It measures 162 inches in length and 1-1/4 inches in width, with a blade thickness of 0.042 inches and a kerf width of 0.066 inches. The tooth configuration runs 5 to 8 TPI on a variable pitch pattern with a vari-raker tooth set and a positive rake angle. The cutting teeth are High Speed Steel M42 grade, bonded to a spring steel back. This combination of tooth material and back flexibility is well suited for production cutting where blade fatigue and heat buildup are concerns. Licensed machinists, fabricators, and metal shop technicians are the primary installers of blades in this class.

This blade is part of the LENOX Classic Pro series and is intended for horizontal and vertical bandsaw applications cutting a wide range of metals. It handles alloy steel, carbon steel, stainless steel, tool steel, structural steel, mold steel, bearing steel, aluminum, and other non-ferrous metals. The variable pitch tooth form reduces harmonic vibration during the cut, which helps extend blade life and improve cut surface quality across varying cross-sections and material hardnesses. It is a practical choice for job shops and production facilities cutting mixed stock.

Key Features

• M42 High Speed Steel teeth bonded to a spring steel back for durability under high-cycle cutting
• Variable pitch, vari-raker tooth geometry reduces vibration and improves cut finish
• 5 to 8 TPI range suited for a variety of material thicknesses and cross-sections
• Positive rake angle promotes aggressive chip clearance in metal cutting
• Welded construction for a continuous, seamless loop with no joining hardware
• Cuts alloy steel, stainless steel, aluminum, non-ferrous metals, and structural steel

Compatibility

Designed for metal-cutting bandsaws that accept a 162-inch blade loop with a 1-1/4 inch width. Verify your saw's wheel diameter and blade tracking specifications before installation to confirm fit.

Installation Notes

Blade installation should be performed by a qualified machinist or shop technician with the bandsaw fully powered down and de-energized at the disconnect. Blade tension and tracking must be set according to the saw manufacturer's specifications for the blade width being installed. Wear cut-resistant gloves when handling the coiled blade, as the teeth present a laceration hazard during uncoiling and mounting. Break in a new blade by running initial cuts at reduced feed rate and speed for the first several minutes to seat the teeth and reduce the risk of premature tooth stripping.