Lenox 1792837 Welded Bandsaw Blade 3-4 Tpi Bi-metal

Product Description

The LENOX 1792837 is a welded bi-metal bandsaw blade engineered for continuous cutting in metal fabrication and structural applications. Measuring 15 feet 6 inches in length, 1 inch wide, and 0.035 inches thick, it fits standard vertical and horizontal bandsaws designed for that blade length. The blade features a variable 3 to 4 TPI tooth pattern with a Vari-Raker tooth set, which helps clear chips efficiently and reduces heat buildup during cuts through a wide range of metal stock. The M42 high-speed steel tooth material provides wear resistance on hard and abrasive materials. This is a Classic Pro series blade intended for production-level use by metalworking tradespeople and fabricators.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, mold steel, and bearing steel, as well as aluminum and other non-ferrous metals. The variable pitch and positive rake angle make it a practical choice when a shop handles mixed material types or varying stock thicknesses in a single shift. It is designed for professional bandsaw operations in metal shops, fabrication facilities, and maintenance departments where blade consistency and cut quality are priorities.

Key Features

• Bi-metal construction with M42 high-speed steel teeth bonded to a spring steel back for flexibility and edge retention
• Variable 3 to 4 TPI pitch with Vari-Raker tooth set for efficient chip clearance and reduced vibration
• Positive rake angle promotes aggressive, consistent cutting action on ferrous and non-ferrous metals
• 0.0570-inch kerf width minimizes material waste per cut
• Welded blade in Classic Pro series for production-level bandsaw use
• Compatible with a wide material application range including stainless steel, tool steel, aluminum, and structural steel

Compatibility

Designed for horizontal and vertical bandsaws requiring a 15-foot 6-inch blade length with a 1-inch blade width. Suitable for cutting alloy steel, aluminum, non-ferrous metal, carbon steel, stainless steel, structural steel, tool steel, mold steel, and bearing steel.

Installation Notes

Blade installation should be performed by a qualified metalworking technician or machinist with the bandsaw fully powered down and locked out per OSHA lockout/tagout procedures. Verify that blade tension, guide settings, and wheel alignment are set to the bandsaw manufacturer specifications before operation. Wear cut-resistant gloves when handling the coiled blade. Do not exceed the maximum blade speed rated for the installed bandsaw model.