Lenox 1772382 Welded Bandsaw Blade 21 Ft 1-1/4 in Wide

Product Description

The LENOX 1772382 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. Stretching 21 feet in length and 1-1/4 inches wide at 0.042 inches thick, this blade runs on industrial horizontal and vertical bandsaws used in fabrication shops, pipe and structural cutting, and heavy-duty maintenance operations. The variable pitch tooth pattern ranges from 1.5 to 2 TPI, reducing harmonic vibration and minimizing blade chatter across a range of stock thicknesses. High speed steel M42 teeth with a positive rake angle and raker set deliver aggressive, consistent cuts through tough materials.

This blade is suited for contour cutting and straight cuts on structural steel, pipe, tubing, angle iron, and similar materials. The raker tooth set and variable pitch geometry make it effective when cutting bundles or mixed cross-sections where a fixed pitch would load up or stall. It is a common choice for metal fabrication shops, mechanical contractors, and industrial maintenance crews running large-frame bandsaw equipment.

Key Features

• 21-foot welded length ready to install on compatible bandsaw frames
• 1.5 to 2 TPI variable pitch reduces vibration and extends blade life across varying stock sizes
• M42 high speed steel teeth provide hardness and heat resistance for metal cutting
• Positive rake angle for aggressive feed rates and efficient chip removal
• Raker tooth set maintains consistent cutting geometry and reduces blade deflection
• Contour cutting capable for curved or irregular profile work

Compatibility

Designed as an OEM-style replacement or direct-fit blade for industrial bandsaws accepting a 21-foot, 1-1/4-inch-wide blade with standard 0.042-inch kerf thickness.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician following the saw manufacturer's tension and tracking specifications. Power down and lockout the bandsaw before removing the old blade or mounting the new one. Wear cut-resistant gloves when handling the coiled blade — the teeth are sharp and the blade can spring when uncoiled. Verify wheel guards and blade guides are properly adjusted before returning the saw to service.