Lenox 1772328 Welded Bandsaw Blade 5 to 8 Tpi Bi-metal

Product Description

The LENOX 1772328 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. It measures 11 feet 5 inches in overall length, 1 inch wide, and 0.035 inches thick, with a variable pitch of 5 to 8 TPI. The blade is built on a spring steel back with M42-grade high speed steel teeth, a positive rake angle, and a Vari-Raker tooth set. This combination delivers aggressive cutting action with reduced vibration and heat buildup. It is suited for use in metal-cutting vertical or horizontal band saws common in fabrication shops, maintenance facilities, and industrial trade environments. A licensed machinist or experienced metalworking professional is the typical installer.

This blade is designed for cutting a wide range of metals, including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, non-ferrous metals, and titanium. The variable pitch tooth form and Vari-Raker set make it effective across varying cross-sections and material hardnesses, from thin-walled tubing to solid bar stock. It is part of the LENOX QXP series, which targets high-performance production cutting where blade life and cut quality are priorities. The 0.058-inch kerf width is consistent with standard 1-inch bi-metal blade stock, minimizing material loss per cut.

Key Features

• Variable pitch 5 to 8 TPI with Vari-Raker tooth set reduces vibration and improves surface finish
• M42-grade high speed steel teeth provide extended cutting life on hard and abrasive metals
• Spring steel back resists fatigue and flexing during continuous-cut operation
• Positive rake angle increases cutting aggression on tough materials including titanium and stainless steel
• Toothed, milled, and variable cutting edge style suits a broad range of cross-sections
• Part of the LENOX QXP series for high-output metal-cutting production environments

Compatibility

Designed as a welded replacement bandsaw blade for metal-cutting band saws accepting a 1-inch wide blade at 11 feet 5 inches in length. Verify your saw's wheel diameter and blade length specification before installation.

Installation Notes

Welded bandsaw blade installation should be performed by a qualified machinist or trained technician familiar with band saw equipment. Power down and lockout the saw before removing the old blade or mounting the new one. Use appropriate blade guides and tensioning settings as specified by the saw manufacturer — do not exceed the rated blade speed for bi-metal blades. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades.