Lenox 1620D2C1464 Band Saw Blade Coil 1/4 in 250 Ft

Product Description

The LENOX 1620D2C1464 is a bi-metal band saw blade coil stock designed for contour cutting applications in metal fabrication, mechanical, and trade shop environments. The coil measures 250 feet in length and 1/4 inch in width with a blade thickness of 0.035 inches, giving fabricators a full supply of blade material for custom-length cuts. The tooth edge is high speed steel (HSS) with a variable pitch of 10-14 TPI and a modified raker tooth set. The flexible back construction allows the blade to run through curved cutting paths without premature fatigue or cracking. Metalworking tradespeople and industrial maintenance techs are the primary installers of this blade stock.

This coil stock is suited for band saw machines that accept 1/4-inch wide blades and require field-cut blade lengths. It is appropriate for light to medium metal cutting tasks including pipe, tubing, structural stock, and irregular profiles. The variable pitch tooth pattern reduces vibration and noise during the cut, which is particularly useful when cutting varying wall thicknesses or mixed material cross-sections. The modified raker tooth set promotes efficient chip clearance, reducing heat buildup during continuous cutting operations.

Key Features

• Bi-metal construction with high speed steel teeth for extended cutting life
• Variable pitch 10-14 TPI reduces vibration and suits varied material thicknesses
• Modified raker tooth set promotes chip clearance and reduces heat buildup
• Flexible back design resists fatigue cracking during contour and curved cuts
• 250-foot coil allows field-cutting to exact blade loop lengths as needed
• Toothed cutting edge with contour cutting capability for irregular profiles

Compatibility

Designed for band saw machines that accept 1/4-inch wide blade stock. Blade length is field-cut and welded from coil, making it adaptable to a wide range of band saw frame sizes that accommodate this blade width and 0.035-inch thickness.

Installation Notes

Installation of coil stock blades requires a blade welder to cut, join, and grind the blade to the correct loop length for the machine. Disconnect and lock out the band saw from its power source before removing the old blade or installing the new one. Blade tension should be set per the band saw manufacturer's specifications for 1/4-inch blade width. Follow applicable shop safety codes and wear cut-resistant gloves when handling uncoiled blade stock.