Lenox 1614D2C1464 Band Saw Blade Coil 1/4 in 250 Ft

Product Description

The LENOX 1614D2C1464 is a bi-metal band saw blade coil stock designed for continuous-length cutting applications in trade and industrial environments. The coil measures 250 feet in length and 1/4 inch wide with a 0.025 inch blade thickness, giving fabricators and service techs the flexibility to cut custom blade lengths on-site. The cutting edge uses high speed steel teeth in a variable pitch, 10-14 TPI configuration with a modified raker set, optimizing chip clearance across a range of materials and wall thicknesses. The flexible back construction reduces blade fatigue and breakage during contour cutting operations.

This coil stock suits metal fabrication shops, HVAC contractors, plumbing and pipefitting crews, and general trade professionals who run band saws regularly and prefer to weld their own blades to length. It is well suited for contour cutting of tubing, conduit, structural shapes, and other metal stock where a fixed-length blade would require frequent changeovers. The variable pitch TPI pattern handles both thin-wall and heavier cross sections without requiring a blade swap, making it a practical bulk option for shops cutting a mix of material thicknesses.

Key Features

• Bi-metal construction with high speed steel teeth for extended cutting life on metal stock
• Variable pitch 10-14 TPI reduces vibration and handles varied material thicknesses
• Modified raker tooth set promotes efficient chip evacuation and consistent cut quality
• Flexible back resists fatigue cracking during contour and radius cuts
• 250-foot coil allows on-site blade welding to any required length
• 1/4 inch width suited for tight-radius contour cutting applications

Compatibility

Designed as a bulk coil stock for band saws that accept 1/4 inch wide blades and support field-welded or shop-welded blade lengths. Confirm your saw's blade welder capacity and wheel geometry before cutting and welding coil stock to length.

Installation Notes

Blade welding from coil stock should be performed by a qualified technician using a band saw blade welder set to the correct flash and upset parameters for bi-metal stock. Disconnect and lock out the band saw before installing or replacing any blade. Verify blade tension, tracking, and guide alignment after installation per the saw manufacturer's specifications. Wear cut-resistant gloves when handling uncoiled blade stock.