Lenox 1611D2C1464 Band Saw Blade Coil 1/4 in 250 Ft

Product Description

The LENOX 1611D2C1464 is a bi-metal band saw blade coil stock designed for continuous-cut applications where shop-cut blade lengths are required. The coil measures 250 feet in length with a 1/4-inch blade width and a 0.025-inch blade thickness. The cutting edge features high speed steel teeth in a wavy set pattern with a variable pitch of 14 to 18 teeth per inch, making it well suited for cutting a range of material thicknesses in a single setup. The flexible back construction allows the blade to run on standard band saw wheel configurations without fatigue cracking during operation. This coil stock is used by fabricators, maintenance technicians, and metalworking shops that weld their own blades to spec.

This coil stock is appropriate for contour cutting operations on metal tubing, structural shapes, and solid stock where a narrow blade width provides the turning radius needed. The 1/4-inch width allows for tighter radius cuts than wider blade stock. The variable pitch tooth pattern reduces harmonic vibration during the cut, which extends blade life and improves surface finish on ferrous and non-ferrous materials. Shops that run vertical or horizontal band saws and prefer to weld custom blade lengths on-site will find this coil format practical for high-volume blade consumption environments.

Key Features

• Bi-metal construction with high speed steel teeth bonded to a flexible alloy steel back
• Variable pitch 14 to 18 TPI reduces vibration and suits a range of material cross-sections
• Wavy tooth set improves chip clearance and reduces blade drift
• Flexible back design resists fatigue cracking on standard band saw wheel diameters
• Supports contour cutting applications requiring tight radius capability
• 250-foot coil format allows shop-cut blade lengths to be welded to any required dimension

Compatibility

Designed as a shop-weld coil stock for use on standard vertical and horizontal band saws that accept 1/4-inch blade width. Verify wheel diameter, blade guide spacing, and welder capability before cutting and welding lengths from this coil.

Installation Notes

Blade coil stock requires a band saw blade welder and grinder to produce finished loop blades. Wear cut-resistant gloves when handling uncoiled stock, as the blade edge is live. Ensure the band saw is fully powered down and the blade tension is released before removing an existing blade and installing a welded replacement. Follow the band saw manufacturer's tensioning specifications when mounting the finished blade.