Lenox 1600D2C1464 Band Saw Blade Coil 1/4 in 100 Ft

Product Description

The LENOX 1600D2C1464 is a bi-metal band saw blade coil stock designed for continuous cutting operations in metalworking and fabrication environments. The coil measures 100 feet in length and 1/4 inch in width with a blade thickness of 0.025 inches, allowing it to be cut to any custom length on site. The cutting edge features high speed steel teeth in a wavy set pattern with a variable pitch of 14 to 18 teeth per inch (TPI), which reduces vibration and noise while extending blade life across a range of material thicknesses. The flexible back construction allows the blade to track consistently on band saw wheels without fatigue cracking over extended use. This coil format is suited to shops and service fleets that weld their own blades to minimize per-blade cost.

This coil stock is used in professional metal-cutting applications including pipe fabrication, structural steel work, HVAC duct framing, and general metalworking shops. The variable pitch tooth geometry makes it effective on thin-wall tubing, solid bar stock, and bundled sections. The wavy tooth set helps clear chips efficiently in ferrous and non-ferrous metals. It is typically installed by machinists, fabricators, and trade mechanics who operate vertical or horizontal band saws and have access to a blade-welding station for cutting and joining coil stock to finished loop blades.

Key Features

• Bi-metal construction with high speed steel teeth for extended cutting life
• Variable pitch 14-18 TPI reduces vibration and suits varied material thicknesses
• Wavy tooth set promotes efficient chip clearance and smooth cutting action
• Flexible back resists fatigue cracking during continuous band saw operation
• 100-foot coil allows custom blade lengths to be welded on site
• Toothed cutting edge supports contour cutting applications

Compatibility

Designed for use with band saws that accept 1/4-inch wide blades. Coil stock requires a blade welder to cut and join to finished loop length. Confirm wheel diameter and blade guide specifications on the host saw before cutting to length.

Installation Notes

Installation of band saw blades from coil stock should be performed by trained personnel with access to a proper blade-welding unit. Disconnect and lock out power to the band saw before removing the old blade or installing a new one. After welding, inspect the weld joint for straightness and grind flush before mounting. Verify blade tension and tracking per the saw manufacturer's guidelines before resuming cuts.