Lenox 1415D2C12127 Band Saw Blade 6 Tpi 1/2 in 250 Ft Bi-metal

Product Description

The LENOX 1415D2C12127 is a bi-metal band saw blade supplied as coil stock, allowing shops and service vehicles to cut custom blade lengths as needed. The blade measures 1/2 inch wide and 0.035 inches thick, with a constant-pitch hook-tooth profile at 6 teeth per inch (TPI). The cutting edge uses high speed steel teeth bonded to a flexible back, a construction that resists tooth strippage under heavy feed pressure while allowing the back to flex through tight radii. Each coil delivers 250 feet of usable stock. This format is standard for shops that run multiple band saw frame sizes or frequently replace blades on production equipment.

This coil stock is suited for contour cutting applications in metalworking, mechanical contracting shops, HVAC fabrication environments, and general trade shops where band saw blades are consumed regularly. The 6 TPI constant pitch is effective on solid stock, structural shapes, and tubing in light to medium cross-sections. The hook tooth form provides aggressive chip clearance and a faster cut compared to standard rake profiles. The flexible back construction makes this stock compatible with both vertical and horizontal band saw frames that require a coilable blade material.

Key Features

• Bi-metal construction: high speed steel teeth bonded to a flexible alloy back for extended tooth life
• 6 TPI constant pitch for consistent chip load on light to medium solid stock and tubing
• Hook tooth form promotes aggressive chip evacuation and faster cut rates
• 1/2 inch blade width at 0.035 inches thickness fits a wide range of band saw frames
• 250-foot coil allows on-site or in-shop blade fabrication to exact frame length
• Flexible back resists cracking during coiling, storage, and operation through curved cuts

Compatibility

Designed as coil stock for trade and production shops running band saw frames that accept 1/2 inch wide bi-metal blades. Blades are cut and joined from coil to match specific frame wheel-to-wheel dimensions.

Installation Notes

Blade fabrication from coil stock requires a blade welder or mechanical connector sized for 1/2 inch stock. Wear cut-resistant gloves when handling and uncoiling band saw blade material, as the coil stores significant spring energy. Tension and track the finished blade according to the band saw frame manufacturer's specifications before making a cut. Inspect the weld or joint for alignment before powering the machine.