Lenox 1414D2C12127 Band Saw Blade Coil 250 Ft 1/2 in

Product Description

The LENOX 1414D2C12127 is a bi-metal band saw blade coil stock designed for continuous-length cutting applications in professional shop and field environments. The coil measures 250 feet in length with a blade width of 0.5 inches and a thickness of 0.035 inches, giving fabricators and service technicians a large supply for cutting multiple blades to custom lengths. The bi-metal construction pairs a flexible alloy steel back with high speed steel teeth, delivering durability and edge retention across demanding cut cycles. At 4 teeth per inch with a constant pitch and hook tooth form, this blade is suited for general-purpose and moderate-thickness material cutting.

This coil stock is intended for use in band saw resaw and contour cutting operations typical of metalworking, HVAC fabrication, plumbing rough-in, and general mechanical trade work. The Lenox tooth set geometry and flexible back allow the blade to track consistently on standard band saw wheels. Shops that cut blades to custom lengths from coil stock will find this format efficient for high-volume or multi-machine operations. Contour cutting is supported by the blade geometry.

Key Features

• Bi-metal construction with high speed steel teeth for extended edge life
• 4 TPI constant pitch with hook tooth form for efficient material removal
• Flexible alloy steel back reduces blade fatigue and breakage during contour cuts
• 0.5-inch blade width supports both straight and contour cutting applications
• 250-foot coil allows custom blade lengths to be cut for multiple saws
• Lenox tooth set for consistent kerf width and predictable cut quality

Compatibility

Designed as a coil-stock replacement suitable for band saws that accept 0.5-inch wide bi-metal blades with standard wheel and guide configurations. Cut to length and weld or braze to fit specific machine throat and wheel diameter requirements.

Installation Notes

Blade coil stock must be cut to the correct length and joined by a qualified operator using a blade welder or brazing setup appropriate for bi-metal material. Power down and de-energize the band saw completely before removing the old blade or installing a new one. Wear cut-resistant gloves when handling uncoiled stock, as the blade edges and coil spring tension present a laceration hazard. Verify blade tension, tracking, and guide alignment according to the saw manufacturer specifications before resuming operation.