Lenox 1410D2C3895 Band Saw Blade Coil 3/8 in Bi-metal 4 Tpi

Product Description

The LENOX 1410D2C3895 is a bi-metal band saw blade supplied in coil stock form, allowing contractors and fabricators to cut blades to the exact length required for their saw. The coil measures 250 feet in length, 3/8 inch wide, and 0.035 inch thick. Cutting is performed by high speed steel teeth arranged in a hook tooth form at a constant 4 teeth per inch (TPI) pitch. The flexible back reduces blade fatigue and the risk of cracking during contour cutting operations. Electricians, pipefitters, plumbers, and metalworkers routinely stock coil stock to minimize blade inventory costs and maximize blade life yield per purchase.

This coil stock is suited for contour cutting applications on metal pipe, conduit, structural steel, and similar ferrous and non-ferrous materials. The 4 TPI constant pitch is appropriate for moderate to thick cross-sections where aggressive stock removal is the priority. The Lenox tooth set geometry and hook tooth form promote efficient chip evacuation and help maintain consistent cut quality throughout the length of the coil. The product is packaged as a single 250-foot coil.

Key Features

• Bi-metal construction with high speed steel teeth for extended blade life on metal cutting applications
• Hook tooth form at 4 TPI constant pitch for aggressive, efficient stock removal
• Flexible back reduces fatigue cracking and supports contour cutting capability
• 250-foot coil format allows field or shop cutting to any required blade length
• 3/8 inch blade width and 0.035 inch thickness suited for tight radius contour cuts
• Lenox tooth set for consistent kerf width and blade tracking

Compatibility

Designed as coil stock for band saws accepting 3/8 inch wide blades with a 0.035 inch blade thickness; suitable for welding into finished loop blades to fit a wide range of portable and stationary band saw models that accept this blade profile.

Installation Notes

Coil stock should be cut and welded by a qualified technician using a blade welder appropriate for bi-metal blade stock. Ensure the band saw is fully powered down and unplugged before installing any blade. Verify blade tension, tracking, and guide settings according to the saw manufacturer specifications after installing a new blade. Wear cut-resistant gloves when handling uncoiled blade stock, as the edges and teeth present a laceration hazard.