Lenox 1405D2C1464 Band Saw Blade Coil 6 Tpi 1/4 in Bi-metal

Product Description

The LENOX 1405D2C1464 is a bi-metal band saw blade coil stock designed for continuous-length blade cutting and custom band saw blade fabrication. The coil measures 250 feet in total length with a blade width of 0.25 inches and a blade thickness of 0.025 inches. Constructed with a flexible back and high speed steel teeth set to a 6 teeth-per-inch (TPI) constant pitch hook tooth form, this coil stock delivers consistent cutting geometry across the full length of the coil. It is suited for metal-cutting applications where controlled tooth engagement and durability are required. The coil weighs 7 pounds.

This blade coil stock is used in trade and industrial settings where band saw blades are cut to length on-site or fabricated for specific saw configurations. The 6 TPI constant pitch hook tooth pattern is well matched to contour cutting and general metal stock removal. Shops running multiple band saw sizes or requiring non-standard blade lengths benefit from coil stock over pre-welded blades. The bi-metal construction pairs a flexible alloy steel back with high speed steel teeth, extending edge life under regular production cutting demands.

Key Features

• Bi-metal construction: flexible alloy steel back with high speed steel teeth for extended blade life
• 6 TPI constant pitch hook tooth form optimized for controlled metal contour cutting
• Lenox tooth set for consistent kerf width and reduced blade drift
• 0.025 inch blade thickness and flexible back reduce blade fatigue on tight radius cuts
• 250-foot coil length allows custom blade sizing for multiple saw configurations
• Toothed cutting edge style ready for direct use after cutting and welding to length

Compatibility

Designed as coil stock for band saw blade fabrication; compatible with band saws that accept blades 0.25 inches wide after the coil is cut and welded to the required loop length for the specific machine.

Installation Notes

Cutting and welding band saw blade coil stock to length should be performed by qualified personnel using a blade welder appropriate for bi-metal stock. Ensure the band saw is fully powered down and the blade tension released before installing a new blade loop. Verify wheel diameter, blade guide spacing, and throat depth on the target saw to confirm the correct finished blade length before cutting from the coil. Finished welded blades should be dressed and deburred at the weld joint before installation.