Lenox 12907D2B123657 Bandsaw Blade 12 Ft 10-14 Tpi

Product Description

The LENOX 12907D2B123657 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting and general fabrication work. At 12 feet in length and 1/2 inch wide, it fits standard vertical and horizontal bandsaws common in trade shops and fabrication environments. The blade pairs a high speed steel M42 tooth edge with a spring steel back, combining edge retention with fatigue resistance. A variable 10 to 14 TPI Vari-Raker tooth pattern reduces vibration and chatter across varying workpiece thicknesses. Kerf width runs 0.043 inches. Installed by machinists, metalworkers, and maintenance trades, this blade suits production and intermittent cutting cycles alike.

This blade is designed for contour and straight cutting on a wide range of materials including carbon steel, alloy steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals, as well as wood. The variable pitch tooth geometry makes it well suited for cutting material with changing cross-sections or interrupted cuts. It is a practical choice for job shops, maintenance facilities, and fabrication operations that run a single blade across mixed stock.

Key Features

• M42 high speed steel tooth material for extended edge life on hard metals
• Variable 10 to 14 TPI Vari-Raker tooth pattern reduces vibration and improves cut quality on varied stock
• Spring steel back provides flexibility and fatigue resistance during continuous use
• 0.043 inch kerf width minimizes material loss per cut
• Contour cutting capable for curved or irregular workpiece profiles
• Welded construction for consistent blade tension and tracking

Compatibility

Designed as an OEM-compatible replacement or standard consumable for bandsaws accepting a 12-foot loop blade with 1/2 inch width and 0.025 inch blade thickness.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician with the machine fully de-energized and locked out per OSHA lockout/tagout procedures. Verify wheel guides and blade tension settings are appropriate for the blade width and thickness before powering the saw. Wear cut-resistant gloves when handling the coiled blade during installation. Inspect blade welds and tooth set before first use and after any blade stall event.