Legris 7914 08 13 Miniature Ball Valve 1/4 in Mnpt

Product Description

The LEGRIS 7914 08 13 is a miniature manual ball valve designed for 1/4 inch pipe connections using an MNPT x Push-To-Connect end configuration. The composite body keeps weight low at 0.15 pounds while the nickel-plated brass trim and Buna-N seals deliver reliable shutoff performance in fluid control applications. The short handle allows operation in tight spaces where a full-length lever would not fit. Licensed plumbers, HVAC technicians, and industrial service pros install this type of valve where compact inline shutoff is needed on small-diameter lines.

This valve is suited for residential and light commercial applications involving 1/4 inch pipe runs where a standard port ball valve provides adequate flow control. The MNPT x Push-To-Connect configuration allows one threaded end to mate with existing pipe fittings while the push-to-connect end accepts compatible tubing for fast, tool-reduced assembly. Typical install scenarios include compressed air lines, refrigeration tubing circuits, and small liquid supply lines where an inline manual shutoff is required.

Key Features

• Miniature profile fits confined spaces where standard ball valves will not
• MNPT x Push-To-Connect ends combine threaded and push-fit connections in one valve
• Composite body reduces weight to 0.15 pounds
• Nickel-plated brass trim resists corrosion in wet service environments
• Buna-N seat and seal materials provide positive shutoff on common fluids and gases
• Short red handle gives clear visual indication of valve position in tight quarters

Compatibility

Designed as an OEM-style replacement or new-installation miniature ball valve for 1/4 inch pipe systems using MNPT x Push-To-Connect connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified HVAC technician. Depressurize and drain the line completely before removing or installing any valve. Apply appropriate thread sealant to the MNPT end per IPC guidelines, and verify the push-to-connect tubing outer diameter is compatible before seating the fitting. Do not overtighten the threaded connection into the composite body.