Legris 0114 08 17 Compression Tube Connector 3/8 Bspp

Product Description

The LEGRIS 0114 08 17 is a brass compression tube connector designed to join an 8 mm outside-diameter tube to a 3/8 inch BSPP male threaded port. It provides a secure, leak-resistant mechanical connection without requiring solder, flare tools, or thread sealant on the tube side. Rated to 1450 psi maximum working pressure and a temperature range of -40 degrees F to 250 degrees F, this fitting suits demanding fluid and pneumatic systems where reliability and pressure integrity are critical. Plumbers, pipefitters, and industrial maintenance technicians commonly install this type of fitting in hydraulic, pneumatic, and process-fluid lines.

This connector is suited for residential and light commercial fluid control applications, pneumatic tool lines, and instrumentation tubing where an 8 mm OD tube must terminate at a British Standard Parallel Pipe male thread port. The BSPP thread standard is common in European-specification equipment, imported machinery, and hydraulic assemblies that follow ISO 228 thread specifications. It is a single-piece, all-brass body with no additional inserts required for standard compression tube connections.

Key Features

• Brass construction resists corrosion in water, air, and light hydraulic fluid service
• 1450 psi maximum working pressure suits pneumatic and hydraulic applications
• Operating temperature range of -40 degrees F to 250 degrees F
• 3/8 inch BSPP male thread conforms to ISO 228 parallel thread standard
• Accepts 8 mm outside-diameter tubing via compression-style end connection
• Compact, single-piece body for straightforward inline or panel installation

Compatibility

Designed as an OEM-style replacement or direct-install compression connector for pneumatic, hydraulic, and process-fluid systems using 8 mm OD tubing with 3/8 inch BSPP male threaded ports.

Installation Notes

Installation should be performed by a qualified plumber, pipefitter, or industrial maintenance technician familiar with compression fittings and BSPP threaded connections. Depressurize and isolate the system completely before removing any existing fitting or installing this connector. Inspect the tube end for squareness and burrs before seating it into the compression body, as tube-end defects are the leading cause of compression fitting leaks. BSPP is a parallel thread - use an appropriate thread sealant or bonded seal on the male thread as required by the equipment manufacturer.