Legrand TR20 Tamper Resistant Duplex Receptacle 20A 125V

Product Description

The LEGRAND TR20 is a tamper-resistant duplex receptacle rated at 20 amps and 125 volts, designed for residential and light commercial electrical installations. The built-in tamper-resistant shutter mechanism blocks foreign object insertion while still allowing standard plug connections, meeting NEC requirements for tamper-resistant protection in dwelling units. At 0.25 pounds, this receptacle installs in a standard single-gang wall box and features a brown finish suited for matching brown or almond decor schemes. Licensed electricians specify this device where code mandates tamper-resistant outlets, including kitchens, bathrooms, and all readily accessible locations in new construction and renovation projects.

The TR20 is a 20-amp rated device, making it appropriate for circuits serving small appliances and equipment with higher current draw than a standard 15-amp outlet can support. The brown color designation suits installations where a neutral or earth-toned finish is preferred. It is installed in standard single-gang outlet boxes as a direct replacement or new-work device in branch circuit wiring applications governed by the National Electrical Code.

Key Features

• Tamper-resistant shutter mechanism meets NEC tamper-resistant outlet requirements
• 20-amp, 125-volt rating supports higher-draw appliance circuits
• Duplex configuration provides two standard receptacle outlets in one device
• Brown finish for neutral decor matching
• Standard single-gang form factor for straightforward box installation

Compatibility

Designed as an OEM-style replacement or new-work duplex receptacle for standard single-gang electrical boxes in 20-amp, 125-volt branch circuits.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code and applicable local codes. Always shut off the branch circuit breaker and verify the circuit is de-energized with a non-contact voltage tester before wiring the device. Use a flathead screwdriver for terminal screws and follow the wiring diagram on the device body. Do not exceed the device's 20-amp and 125-volt ratings.