

Ships same day if ordered by 12 pm
Manufacturer pricing rules prevent us from advertising our discount — no account or email required to see it.
Secure Payments
Easy Returns
Expert Advice
Fast Shipping
The LEGRAND ci-305 is a passive infrared (PIR) ceiling-mount occupancy sensor designed for low-voltage commercial lighting control systems. Operating at 24VDC, it provides 360-degree coverage up to 1200 square feet, automatically switching lighting loads on when occupancy is detected and off after the space clears. The sensor features a flat, low-profile ABS housing that mounts flush to the ceiling using included spring clips. Adjustable time delay and sensitivity settings let technicians dial in performance to match the space. A built-in light level sensor prevents the unit from triggering during daylight hours when additional illumination is not needed. Part of the Wattstopper product line, this sensor is intended for licensed electrical contractors working on commercial lighting retrofit and new-construction projects.
The ci-305 is suited for open-plan commercial interiors including offices, conference rooms, corridors, and similar spaces where automatic occupancy-based lighting control is required. It installs on flat ceiling surfaces and is rated for commercial application sectors. A compatible power pack is required for operation and must be sourced separately. The unit ships in white finish to blend with standard commercial ceiling tiles and grid systems. Indicator lights on the sensor body assist with commissioning and troubleshooting during initial setup and periodic service calls.
Designed for use within the Wattstopper low-voltage commercial lighting control ecosystem. Requires a compatible 24VDC power pack for operation. No specific compatible model numbers were provided in the product data.
Installation should be performed by a licensed electrician in accordance with the NEC and applicable local codes. De-energize the circuit and verify zero voltage at the mounting location before handling any wiring or mounting hardware. The sensor requires a separate compatible power pack — confirm power pack compatibility before installation. Avoid mounting directly over HVAC supply diffusers or in locations with excessive air movement, as drafts can interfere with PIR detection accuracy.
Thanks for subscribing!
This email has been registered!