Legrand artr202m4 20A Tamper-resistant Duplex Outlet Magnesium

Product Description

The LEGRAND artr202m4 is a 20-amp, 125-volt tamper-resistant duplex receptacle from the adorne Collection, designed for residential and multi-dwelling unit installations. It carries a NEMA 5-20R configuration and uses internal pressure plates for back-only wiring connections, accepting 14 to 12 AWG conductors. Built-in tamper-resistant shutters block foreign object insertion while still allowing standard plug engagement. The outlet is listed to cULUS standards and is rated for indoor use at up to 95 percent relative humidity (non-condensing). Licensed electricians are the typical installing trade for this device.

This receptacle suits residential and multi-dwelling unit applications where a 20-amp circuit is required and NEC tamper-resistant requirements apply, such as kitchen countertop circuits, bedroom circuits, and other general-use branch circuits. Its frosted magnesium finish integrates with the adorne Collection design system. Wall plates are not included and must be ordered separately — the artr202m4 is designed exclusively for use with screwless adorne Collection wall plates.

Key Features

• Tamper-resistant shutters meet NEC requirements for TR receptacles in dwelling units
• NEMA 5-20R configuration supports 20-amp single-phase branch circuits at 125 volts
• Internal pressure plate connections accept 14 to 12 AWG conductors — back-wired only
• Frosted magnesium finish designed exclusively for adorne Collection screwless wall plates
• Single-gang, double-pole, 3-wire configuration for standard box mounting
• cULUS listed with a limited lifetime warranty

Compatibility

Designed for use exclusively with screwless wall plates from the adorne Collection, sold separately. Suitable for residential and multi-dwelling unit 20-amp, 125-volt branch circuit applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the branch circuit at the panel and verify with a non-contact voltage tester before beginning work. This device uses back-only internal pressure plate connections — do not attempt side-screw termination. Confirm the wall plate selected is from the adorne Collection screwless line to ensure proper fit and finish.