Legend Valve 114-163 Angle Stop Valve 1/2 Sweat X 3/8 Od Brass

Product Description

The LEGEND VALVE 114-163 is a rough brass angle stop valve designed for residential and light commercial plumbing shutoff applications. It features a 1/2 inch sweat inlet connection and a 3/8 inch OD compression outlet, making it a standard supply stop for fixtures such as toilets and sinks. The body is chrome plated brass with a pressure rating of 110 PSI WOG. The valve uses a handwheel actuation with a zinc handle and a Buna-N seat and packing for reliable shutoff. Stem material is brass and Celcon. This valve is installed by licensed plumbers and experienced service technicians during new construction, remodel, and repair work.

This angle stop valve is suited for residential and light commercial water supply shutoff service. It is commonly installed at the wall or floor supply stub-out feeding fixture supply lines. The 1/2 inch sweat by 3/8 inch OD compression configuration is a widely used connection pairing for toilet fill valves, lavatory faucets, and similar fixtures. The rough brass finish is appropriate for installations where the valve will be concealed or where chrome finish is not required.

Key Features

• 110 PSI WOG pressure rating for standard residential and light commercial water service
• 1/2 inch sweat inlet by 3/8 inch OD compression outlet connection
• Chrome plated brass body construction for corrosion resistance
• Buna-N packing and seat material for durable, low-leak shutoff
• Zinc handwheel with handwheel actuation for manual operation
• Brass and Celcon stem material for smooth operation under repeated use

Compatibility

Designed as an OEM-style replacement or new-installation angle stop valve for residential and light commercial plumbing systems requiring a 1/2 inch sweat by 3/8 inch OD compression supply stop. Referenced as model S-581RB by the manufacturer.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the main water supply and relieve line pressure before beginning work. The sweat end requires soldering with appropriate flux and solder for potable water systems. Allow the joint to cool fully before pressurizing and inspecting for leaks at both the sweat and compression connections.