Legend Valve 111-104 Bronze Angle Meter Valve 3/4 in Flare X Ips

Product Description

The LEGEND VALVE 111-104 is a bronze angle meter valve designed for gas metering applications where a reliable shutoff and directional flow change are required at the meter connection point. Built to the T-441 specification and rated at 125 PSI cold working pressure, this valve connects a 3/4 inches flare inlet to a 3/4 inches IPS outlet. The angle-body configuration allows the piping direction to shift 90 degrees at the meter, simplifying rough-in in tight utility spaces. Licensed plumbers and gas fitters are the primary installers of this valve in both residential and light commercial service.

This valve is suited for natural gas and LP meter sets where a flare-to-IPS transition is required at the service entrance. The angle pattern body fits standard meter configurations and is commonly installed in residential gas service risers, utility room meter sets, and light commercial meter banks. Its bronze construction makes it appropriate for above-grade exposed installations where corrosion resistance is a factor.

Key Features

• Bronze body construction for corrosion resistance in gas service environments
• Angle valve configuration changes flow direction 90 degrees at the meter connection
• 3/4 inches flare inlet x 3/4 inches IPS outlet for direct meter hook-up
• 125 PSI cold working pressure rating for low-pressure gas distribution systems
• Manufactured to T-441 specification for meter valve service
• ISO-9002 quality-standard production

Compatibility

Designed as an OEM-style replacement or new-installation angle meter valve for residential and light commercial gas meter sets requiring a 3/4 inches flare x 3/4 inches IPS connection.

Installation Notes

Installation must be performed by a licensed plumber or gas fitter in accordance with local gas codes and IFGC requirements. Shut off the gas supply at the utility curb stop before removing or installing any meter valve. Apply approved gas-rated thread sealant or tape to IPS connections only — never apply sealant to flare fittings. Pressure-test all connections with an approved leak-detection solution before returning the meter to service.

Technical Specifications

• Body Material: Bronze
• Inlet Connection: 3/4 inches Flare
• Outlet Connection: 3/4 inches IPS
• Cold Working Pressure: 125 psi
• Valve Pattern: Angle
• Specification: T-441
• Quality Standard: ISO-9002
• Weight: 1.1 pounds

Standard Information

• Brand: LEGEND VALVE
• Manufacturer Part Number: 111-104