L H Dottie TBC43 Toggle Bolt 1/4x3 Inch 50 Pack

Product Description

The L H Dottie TBC43 is a 1/4-inch by 3-inch toggle bolt featuring a combination slotted and Phillips drive head. Toggle bolts are hollow-wall anchors used to fasten fixtures, conduit hangers, junction boxes, and other hardware to drywall, plaster, and similar cavity-wall surfaces where a solid backing is not available. This box contains 50 bolts, making it a practical quantity for installation crews completing a full rough-in or retrofit job. The dual-drive head accepts both a flathead screwdriver and a Phillips driver, giving technicians flexibility in the field. Electricians, HVAC installers, and general contractors routinely reach for toggle bolts when securing equipment to finished wall surfaces.

These toggle bolts are suited for residential and light commercial applications where a reliable hollow-wall anchor is required. Common uses include mounting electrical enclosures, pipe and conduit supports, light fixtures, and HVAC accessory brackets to interior drywall and plaster walls. The 1/4-inch diameter and 3-inch length accommodate wall thicknesses and fixture depths typical of standard construction, allowing the wing anchor to fully expand behind the wall cavity once inserted.

Key Features

• 1/4-inch by 3-inch size suits standard hollow-wall fastening applications
• Combination slotted and Phillips drive accepts multiple screwdriver types
• 50-bolt box quantity supports full project installs without restocking mid-job
• Spring-loaded wing anchor expands behind wall cavity for secure hold in drywall and plaster
• Categorized as a fastener for electrical, HVAC, and plumbing rough-in and finish work

Compatibility

Designed as a standard 1/4-inch toggle bolt for use with hollow-wall surfaces including drywall and plaster in residential and light commercial construction.

Installation Notes

Toggle bolts are installed by electricians, HVAC technicians, and general tradespeople working on hollow wall surfaces. Before installation, confirm wall thickness and cavity depth to ensure the toggle wing can fully open behind the surface. Drill a clearance hole sized to allow the folded toggle to pass through, then insert the bolt with the toggle folded flat and allow it to spring open before tightening. Do not overtighten, as excessive torque can pull the toggle through thin drywall or crush the wall surface.