Kyocera TSJ00710 Turning Insert Cermet 55 Diamond Dcgt

Product Description

The KYOCERA TSJ00710 is a cermet turning insert in the DCGT32.51 geometry, grade TN60, designed for precision metal cutting on CNC lathes and turning centers. The insert features a 55-degree diamond shape with a positive rake angle and 7-degree relief angle, delivering sharp cutting action with reduced cutting forces. The TiCN and NbC coating improves surface wear resistance and thermal stability. With an inscribed circle of 0.375 inches, an insert length of 0.914 inches, a thickness of 0.1563 inches, and a corner radius of 0.0156 inches, this insert is built for finishing and semi-finishing operations on steel workpieces. It is held in place by a screw-clamp toolholder and carries ANSI and ISO compliance under ISO code DCGT11T304.

This insert is suited for external turning, back boring, copying, and sub-spindle operations where tight tolerances and good surface finish on steel are required. Material grades P01, P10, and P20 indicate it is optimized for low-to-medium carbon and alloy steels at a range of cutting parameters. The neutral hand orientation makes it compatible with standard right-hand and left-hand toolholder setups depending on application geometry. It is well-matched to high-speed finishing passes where minimizing tool pressure and achieving dimensional accuracy are priorities. Machinists and CNC programmers specifying tooling for steel turning applications will find this insert fits standard DCGT-style toolholders.

Key Features

• 55-degree diamond insert shape with positive rake for reduced cutting forces on steel
• Cermet substrate with TiCN and NbC coating for enhanced wear resistance and edge stability
• Grade TN60 rated for material grades P01, P10, and P20 steel applications
• Screw-clamp insert holding method for secure, repeatable seating in compatible toolholders
• 2 cutting edges per insert maximize value per unit
• Multi-use capability: external turning, back boring, copying, and sub-spindle operations

Compatibility

Designed as an OEM-style replacement or direct-use turning insert for DCGT-style screw-clamp toolholders conforming to ANSI and ISO standards. Industry standard number DCGT3251TN60; ISO code DCGT11T304.

Installation Notes

Installation is performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate Torx or hex key for the clamp screw as specified by the toolholder manufacturer. Confirm insert seating is flush and the screw is snug before resuming cutting operations.