Kyocera TML00475 CNMG432 Carbide Turning Insert

Product Description

The KYOCERA TML00475 is a CNMG432 style indexable carbide turning insert designed for metal cutting operations on CNC lathes and manual turning centers. It carries KYOCERA grade CA115P with a CVD-applied TiCN/Al2O3/TiN multilayer coating that provides wear resistance and thermal stability during continuous and interrupted cuts. The insert has a diamond 80-degree included angle, a 0.80 mm corner radius, and four usable cutting edges. Negative rake geometry and a neutral hand orientation make it a versatile choice for general turning work. This insert is installed and changed by machinists, toolroom technicians, and CNC operators working in production or job-shop environments.

This insert is suited for external turning, boring, facing, and internal facing applications. The CA115P grade with P-code designation targets carbon steel and alloy steel as primary workpiece materials. The CNMG432 form factor fits standard CNMG-style toolholders that accept a 1/2-inch inscribed circle insert with screw and clamp holding. It is appropriate for both roughing and finishing passes depending on feed rate and depth of cut selection. The package contains one insert per unit of sale.

Key Features

• CVD TiCN/Al2O3/TiN multilayer coating for heat and wear resistance on steel workpieces
• Four cutting edges per insert for extended tool life and lower cost per edge
• Diamond 80-degree insert shape provides a strong cutting edge with good chip clearance
• 0.80 mm corner radius balances surface finish quality with edge strength
• Negative rake, neutral hand geometry fits a wide range of CNMG toolholder setups
• Compatible with screw and clamp holding methods for secure seating under load

Compatibility

Designed for use in standard CNMG-style indexable toolholders accepting a 1/2-inch inscribed circle insert. Suitable for external turning, boring, facing, and internal facing operations on carbon steel and alloy steel workpieces.

Installation Notes

Installation is performed by a machinist or CNC operator. Power down and lock out the machine spindle before indexing or replacing inserts. Use the correct torx or hex key to torque the clamping screw per the toolholder manufacturer specification. Inspect the toolholder pocket and seating surfaces for chips or debris before seating the new insert to ensure proper contact and edge registration.