Krylon K01968008 Brush-on Paint 1 Gal Massey Ferguson Red

Product Description

The KRYLON K01968008 is a brush-on, oil-based paint formulated for outdoor applications on wood and metal surfaces. It delivers a high-gloss finish in Massey Ferguson Red, a color commonly used on agricultural and industrial equipment restoration and touch-up work. The paint ships in a 1-gallon can and covers 50 to 200 square feet per gallon depending on surface porosity and application method. Cleanup requires mineral spirits. It is applied by brush and dries fully within 3 hours under the right conditions. Licensed painters, equipment technicians, and maintenance crews working on metal fabrication or equipment refurbishment are the primary installers.

This paint is suited for outdoor use on metal and wood substrates where a durable, high-gloss finish is required. It applies direct-to-metal, making it appropriate for farm equipment, industrial machinery, and structural steel components that see outdoor exposure. The Massey Ferguson Red color matches the factory finish used on Massey Ferguson agricultural equipment, making it a practical choice for equipment restoration and fleet maintenance programs.

Key Features

• High-gloss finish provides a durable, reflective surface on metal and wood
• Direct-to-metal application — no separate primer required on prepared metal surfaces
• Oil-based, brush-on formula for controlled application on equipment and structural surfaces
• Covers 50 to 200 square feet per gallon depending on surface and application
• Full dry time of 3 hours at recommended temperatures
• Massey Ferguson Red color matched for agricultural equipment restoration

Compatibility

Designed for outdoor use on metal and wood surfaces. The oil-based formula is compatible with properly prepared bare metal, previously painted surfaces, and wood. Direct-to-metal application is supported on clean, rust-free metal substrates.

Installation Notes

Surface preparation is critical before application — clean and degrease all metal surfaces and remove loose rust or old paint. Apply only when ambient and surface temperatures are between 55 and 75 degrees F. Thin with mineral spirits if needed per label instructions, and use mineral spirits for brush and equipment cleanup. Allow adequate ventilation when working in enclosed spaces.