Krylon K01967008 Ford Blue Brush-on Paint 1 Gal

Product Description

The KRYLON K01967008 is a brush-on, oil-based paint formulated for outdoor applications where a durable, high-gloss finish is required. Packaged in a 1-gallon can, it delivers coverage of 50 to 200 square feet per gallon depending on surface porosity and application method. The oil-based composition bonds directly to metal surfaces without a separate primer step and adheres to wood as well. Full dry time is 3 hours under proper conditions. Mineral spirits are required for cleanup. This paint is suited for trade and maintenance professionals applying protective finish coatings to metal structures, equipment, wood fixtures, or exterior surfaces in commercial and industrial settings.

K01967008 is intended for outdoor use on both wood and metal substrates. It performs within an application temperature window of 55 to 75 degrees F. The Ford Blue color in a high-gloss finish makes it appropriate for equipment repaints, structural steel touch-up, fencing, and similar exterior maintenance work. The direct-to-metal capability reduces prep time on clean metal surfaces. Oil-based chemistry provides a harder, more abrasion-resistant film than latex alternatives, which is relevant for surfaces subject to handling, weathering, or mechanical contact.

Key Features

• Oil-based formula bonds directly to metal without a separate primer
• High-gloss finish for durable, weather-resistant exterior surfaces
• Coverage of 50 to 200 square feet per gallon depending on surface and method
• Full dry time of 3 hours at recommended application temperatures
• Ford Blue color in a 1-gallon can for larger coverage jobs
• Mineral spirits cleanup — compatible with standard solvent-handling procedures

Compatibility

Designed for brush-on application to outdoor wood and metal surfaces. Direct-to-metal application is supported on clean, properly prepared substrates.

Installation Notes

Apply between 55 and 75 degrees F with low humidity for best adhesion and film formation. Clean metal surfaces should be free of rust, grease, and loose scale before application. Ensure adequate ventilation when working in enclosed spaces, as oil-based coatings produce solvent vapors during application and drying. Dispose of mineral spirits and used materials in accordance with local regulations for flammable solvents.