Krylon K01962008 Brush-on Paint 1 Gal High-gloss Black

Product Description

The KRYLON K01962008 is a 1-gallon, oil-based brush-on paint formulated for exterior applications on wood and metal surfaces. It delivers a high-gloss black finish and is designed for direct-to-metal use without a separate primer coat in many applications. Coverage ranges from 50 to 200 square feet per gallon depending on surface porosity and application method. Cleanup requires mineral spirits. Fully dry time is 3 hours under proper conditions. This product is applied by brush and is suited for trade professionals and contractors working on structural metal, fencing, gates, and exterior wood components.

This paint is intended for outdoor use on wood and metal substrates. Typical applications include exterior fencing, railings, metal doors, structural steel components, and painted wood trim. The oil-based formulation provides a durable, high-gloss surface film well-suited to surfaces exposed to weather and physical wear. Application should occur within the specified temperature window of 55 to 75 degrees F for proper film formation and adhesion. It ships as a single 1-gallon can.

Key Features

• High-gloss black finish suitable for exterior wood and metal surfaces
• Oil-based formulation for durable film build and adhesion
• Direct-to-metal application supported
• Coverage rate of 50 to 200 square feet per gallon
• Full dry time of 3 hours under recommended conditions
• Brush-on application method for controlled coverage on complex surfaces

Compatibility

Designed for use on outdoor wood and metal surfaces. Direct-to-metal application is supported. Best results are achieved on clean, dry, properly prepared substrates within the 55 to 75 degrees F working temperature range.

Installation Notes

Surface preparation is critical — remove loose paint, rust, mill scale, and contaminants before application. Apply with a natural-bristle brush suited to oil-based coatings. Work only within the specified temperature range of 55 to 75 degrees F to ensure proper adhesion and film formation. Mineral spirits are required for brush cleanup and thinning; follow local VOC regulations and disposal requirements when handling oil-based products.