Krylon K01305007 Acrylic Coating Spray Crystal Clear Gloss

Product Description

The KRYLON K01305007 is a gloss-finish, crystal-clear acrylic coating in a 16 oz aerosol can with an 11 oz net fill. It is a fast-drying protective topcoat designed to seal and protect surfaces against moisture, fading, and light abrasion. With a dry time of approximately 2 hours, it suits time-sensitive finishing work on a wide range of surfaces. Coverage runs 15 to 20 square feet per can under normal application conditions. Painters, maintenance technicians, and finishing contractors reach for this coating when a clear, non-yellowing protective layer is needed without adding color or opacity to the substrate.

This acrylic coating is suited for both light commercial and residential maintenance applications where a transparent protective finish is required. Typical uses include sealing painted or bare surfaces such as metal, wood, and similar substrates in interior or exterior settings. It is commonly applied as a final topcoat over decorative paint work, stenciled markings, or previously finished surfaces to extend durability and resist environmental wear. The gloss finish maintains visual clarity and surface sheen after application.

Key Features

• Crystal-clear gloss finish adds a protective topcoat without altering surface color
• 16 oz aerosol can with 11 oz net fill for consistent spray delivery
• Coverage of 15 to 20 square feet per can under standard conditions
• Approximately 2-hour overall dry time supports efficient workflow
• Acrylic formula provides resistance to moisture and light abrasion

Compatibility

Designed as an OEM-style clear protective topcoat suitable for use over compatible painted, primed, or bare surfaces in general maintenance and finishing applications.

Installation Notes

Application should be performed in a well-ventilated area with appropriate respiratory protection per local safety regulations. Shake the can thoroughly before use and maintain the recommended distance from the surface as indicated on the product label. Apply in light, even passes to avoid runs or pooling. Allow full dry time before handling or applying additional coats.