Krylon K01303007 Clear Gloss Acrylic Coating Spray 11 Oz

Product Description

The KRYLON K01303007 is a crystal clear, gloss-finish acrylic coating in an 11-ounce aerosol can. It applies a transparent protective layer over painted or unpainted surfaces, sealing and protecting against moisture, scuffing, and light abrasion. The fast-dry formula reaches a tack-free state in approximately 15 minutes, with a full dry time of 2 hours. Coverage runs 15 to 20 square feet per can depending on surface porosity and application thickness. This coating is used by trade professionals and skilled DIYers to protect finished work on metal, wood, and other substrates.

This product is suited for light industrial, commercial, and residential finishing applications where a clear, non-yellowing protective topcoat is needed. Typical uses include protecting labeled or stenciled surfaces, sealing decorative metalwork, and preserving finished components in low-exposure environments. It is applied over fully cured base coats and is not intended as a primary structural coating. The aerosol format allows controlled, even application without brush marks or pooling.

Key Features

• Crystal clear gloss finish — no color shift over base coat
• Tack-free in 15 minutes, fully dry in 2 hours
• Covers 15 to 20 square feet per 11-ounce can
• Acrylic formula suitable for metal, wood, and painted surfaces
• Aerosol delivery for consistent, even spray without brush marks

Compatibility

Designed as a clear protective topcoat compatible with most fully cured acrylic and latex base coats on metal, wood, and similarly prepared surfaces.

Installation Notes

Application should be performed in a well-ventilated area, ideally between 50 and 90 degrees F with low humidity. Shake the can thoroughly before spraying and apply in thin, even passes from a consistent distance to avoid runs. Allow the base coat to cure fully before applying this topcoat. Follow local VOC regulations and applicable safety codes for aerosol coatings in enclosed work areas.