Krylon K00829008 Flat Gray Rust-preventive Spray Paint 15 Oz

Product Description

The KRYLON K00829008 is a rust-preventive acrylic alkyd enamel spray paint formulated for direct-to-metal application without a primer coat. It delivers a flat gray finish from a 15 oz aerosol can and covers 30 to 35 square feet per can. The oil-based formula bonds to bare metal, aluminum, and steel surfaces, resisting rust while providing a uniform flat finish. Touch-dry time is approximately 30 minutes, with full handle-dry achieved in 1 hour. Licensed HVAC, plumbing, and general maintenance technicians reach for this product when painting metal enclosures, brackets, conduit, and structural steel components in both indoor and outdoor environments.

This spray paint is suited for a wide range of trade and maintenance applications where a durable, rust-inhibiting finish is needed on bare or lightly corroded metal. It performs on aluminum, steel, and general metal surfaces in residential and commercial settings. The Spray Any Way comfort tip allows the can to be oriented at multiple angles, making it practical for reaching difficult spots on installed equipment, pipe supports, and metal framework. Application temperature must stay between 55 degrees F and 75 degrees F for proper adhesion and cure.

Key Features

• Direct-to-metal formula eliminates the need for a separate primer coat
• Flat gray finish with coverage of 30 to 35 square feet per 15 oz can
• Touch dry in approximately 30 minutes; handle dry in 1 hour
• Spray Any Way comfort tip allows multi-angle application for hard-to-reach surfaces
• Rated for both indoor and outdoor use on metal, aluminum, and steel
• Oil-based acrylic alkyd enamel composition for rust prevention

Compatibility

Designed for use on metal, aluminum, and steel surfaces. This product replaces MSC part number 02512259.

Installation Notes

Surface preparation is critical before application — remove loose rust, grease, and debris from the substrate for best adhesion. Apply only when ambient and surface temperatures are between 55 degrees F and 75 degrees F. Use in well-ventilated areas and follow all applicable safety data sheet guidelines for aerosol solvent-based coatings. Shake the can thoroughly before use and test spray on a scrap surface before applying to the final workpiece.