Krylon K00771008 Rust Preventative Paint Black 1 Gal

Product Description

The KRYLON K00771008 is a black, semi-gloss, alkyd-based rust preventative paint formulated for direct-to-metal application on industrial and commercial surfaces. Sold in a 1-gallon pail, it delivers 361 to 369 square feet of coverage per gallon at recommended film thickness. The alkyd composition provides a durable, corrosion-resistant film that bonds directly to properly prepared metal without a separate primer coat. Application temperature range is 40 degrees F to 120 degrees F. This paint is suited for use by maintenance technicians, industrial painters, and facility crews maintaining structural and mechanical assets.

K00771008 is designed for both interior and exterior applications across a wide range of industrial and commercial environments. Typical uses include structural steel, storage tanks, conveyors, ladders, bar joists, fencing, handrails, machinery, piping, metal doors, pipe racks, shelving, safety markings, and marine above the boot topping. It is also suitable for wood and metal surfaces in general maintenance painting. Full dry time is 8 hours under normal conditions.

Key Features

• Direct-to-metal formulation — no separate primer required on clean, prepared surfaces
• Coverage of 361 to 369 square feet per gallon
• Alkyd composition for corrosion-resistant, durable finish
• Semi-gloss black finish suitable for safety markings and general industrial use
• Application temperature range: 40 degrees F minimum, 120 degrees F maximum
• Interior and exterior rated, including marine above the boot topping

Compatibility

Designed for use on steel, metal, and wood surfaces in interior and exterior applications including structural steel, storage tanks, machinery, piping, fencing, handrails, conveyors, ladders, bar joists, pipe racks, shelving, metal doors, and marine above the boot topping environments.

Installation Notes

Surface preparation is critical before applying rust preventative coatings — remove loose rust, scale, grease, and contaminants by wire brushing, sanding, or abrasive blasting per applicable surface prep standards. Apply only when ambient and surface temperatures are between 40 degrees F and 120 degrees F and relative humidity conditions allow proper film formation. Allow full 8-hour dry time before placing coated surfaces back into service. Use in accordance with all applicable local, state, and federal VOC regulations and safety codes.