Krylon K00259008 Rust-preventive Spray Paint Deep Blue

Product Description

The KRYLON K00259008 is a rust-preventive acrylic alkyd enamel aerosol spray paint formulated for direct-to-metal application. The oil-based formula bonds to bare metal without a primer coat, delivering a gloss finish in Deep Blue. It reaches touch-dry in approximately 30 minutes and is fully handleable within 1 hour at standard conditions. Coverage runs 30 to 35 square feet per 15-ounce can. The Spray Any Way comfort tip allows the can to be held at any angle during application, reducing hand fatigue on overhead or irregular surfaces. Suitable for both indoor and outdoor use, this coating is installed by HVAC technicians, maintenance mechanics, and metal fabricators working with ferrous and non-ferrous metal components.

This spray paint is designed for use on metal, aluminum, and steel surfaces in residential and commercial maintenance applications. Typical uses include coating metal enclosures, brackets, structural steel, equipment housings, and other bare or lightly prepared metal surfaces. Application temperature must fall between 55 degrees F and 75 degrees F for proper adhesion and film formation. The direct-to-metal capability makes it practical for field touch-up and maintenance repaints where priming is not feasible.

Key Features

• Direct-to-metal formula — no primer required on clean metal surfaces
• Touch-dry in approximately 30 minutes; handle-ready in 1 hour
• Gloss finish in Deep Blue for finished appearance and rust resistance
• Spray Any Way comfort tip allows any-angle application
• Indoor and outdoor rated for versatile field use
• Coverage of 30 to 35 square feet per can

Compatibility

Designed for use on metal, aluminum, and steel surfaces. This product replaces MSC part number 02512184.

Installation Notes

Surface must be clean, dry, and free of grease, rust scale, and loose paint before application. Apply only when ambient and surface temperatures are between 55 degrees F and 75 degrees F. Shake the can thoroughly before use and maintain a consistent spray distance for even film build. Use in a well-ventilated area and follow all applicable safety data sheet guidelines for aerosol solvent-based coatings.