Krylon A03614007 Fluorescent Neon Green Marking Paint 17 Oz

Product Description

The KRYLON A03614007 is a 17-fluid-ounce aerosol marking paint designed for outdoor surface layout and utility marking work. Formulated with a solvent-based formula, it lays down a fluorescent neon green stripe on asphalt, brick, and concrete surfaces. Each can covers approximately 332 square feet at a 2-inch stripe width, or 50 to 60 square feet at broader coverage patterns. The inverted-tip design typical of marking paints allows application while walking upright, making it a standard tool for contractors, utility locators, and site-prep crews marking grades, lines, and boundaries on job sites.

This marking paint is intended for outdoor use on hard surfaces including asphalt, brick, and concrete. It is suited for construction layout, utility marking, and pavement striping applications. The fluorescent neon green color provides high visibility against dark or weathered surfaces. Recommended application temperatures range from 70 degrees F to 80 degrees F for proper adhesion and film formation. It is commonly used by civil crews, utility locators, landscapers, and general contractors during site preparation and excavation marking.

Key Features

• Fluorescent neon green color for high-visibility outdoor marking
• Solvent-based formula bonds to asphalt, brick, and concrete
• 17-fluid-ounce fill per can
• Coverage up to 332 square feet at a 2-inch stripe width
• 1-inch stripe width capability for precise layout lines
• Outdoor-rated for site and pavement marking applications

Compatibility

Designed for outdoor marking use on asphalt, brick, and concrete surfaces. Suitable for construction layout, utility locating, and general site-marking tasks requiring a solvent-based aerosol paint.

Installation Notes

Shake the can thoroughly before use and apply only within the recommended temperature range of 70 to 80 degrees F. Hold the can inverted and maintain a consistent pass speed to achieve a uniform stripe width. Avoid application on wet surfaces or when rain is imminent, as adhesion may be compromised. Ensure adequate ventilation when working in partially enclosed areas such as tunnels or underpasses.