Kleenguard 37694 Disposable Coveralls 4XL Zipper 25-pack

Product Description

The KLEENGUARD 37694 is a disposable full-body coverall designed for particle protection in industrial, maintenance, and light manufacturing environments. Built from KleenGuard A40 film laminate material, it provides a barrier against dry particulates while remaining lightweight enough for extended wear. The front zipper closure allows for quick donning and doffing, and the serged seam construction reinforces the garment at stress points. Open cuffs and open ankles accommodate gloves and boot covers as part of a layered PPE program. Each case contains 25 coveralls sized at 4X-Large, making it a practical choice for facilities stocking protective gear in larger sizes.

The 37694 is suited for non-cleanroom particle protection applications including general manufacturing, assembly areas, janitorial and housekeeping tasks, light construction, and maintenance work where workers need protection from non-hazardous dry particulates. The A40 series is designed for environments classified as ISO Non-Cleanroom, making it appropriate for settings where contamination control is important but certified cleanroom standards are not required. Facilities managers, safety coordinators, and tradespeople sourcing disposable PPE for production or service crews are the primary end users.

Key Features

• KleenGuard A40 film laminate fabric provides a particle barrier for non-hazardous dry particulate environments
• Front zipper closure for fast, secure donning and doffing
• Serged seam construction reinforces high-stress areas for improved durability during use
• Open cuff and open ankle design for compatibility with gloves and boot covers
• ISO Non-Cleanroom classification suitable for general industrial and maintenance applications
• White color for easy visual inspection and contamination detection
• 25 coveralls per case with a minimum order quantity of 1 case

Compatibility

Designed for use in non-cleanroom particle protection applications meeting ASTM F1670, ANSI/ISEA 101-1996, and NFPA 99 standards. Intended for non-hazardous protection scenarios only.

Installation Notes

Donning and doffing should follow site-specific PPE protocols established by the safety officer or industrial hygienist. Always inspect the coverall for tears or compromised seams before use. Power down or de-energize equipment as required by your facility lockout/tagout procedures before entering work areas where this garment is worn. Dispose of used coveralls according to local waste management regulations, especially if the garment has contacted hazardous materials even incidentally.