Kipp K0124.208X40 Adjustable Clamping Handle M8x1.25

Product Description

The KIPP K0124.208X40 is an adjustable clamping handle with a threaded stud mount, designed for secure tool-free clamping and positioning in light industrial and mechanical applications. The handle body and stud are both constructed from stainless steel meeting AISI 316 and AISI 303 material specifications, making the assembly suitable for corrosive or washdown environments. The stud carries an M8x1.25 thread with a stud length of 1.57 inches (40 millimeters). The handle arm pivots on a modern-design articulating arm set at a 20-degree angle, allowing the grip position to be adjusted before locking. Finish is electrolytic polish on the handle and bright on the body components. Licensed HVAC, mechanical, and machine service technicians commonly install or replace these handles during equipment servicing.

This clamping handle is suited for use on machine guards, inspection panels, enclosure covers, jigs, and fixtures where repeated hand-adjustment is required. The threaded stud configuration allows direct installation into tapped holes without additional hardware. The compact hub diameter of 17/32 inches (13.5 millimeters) and overall length of 2.93 inches make it appropriate for space-constrained mounting locations on industrial machinery, HVAC equipment access panels, and similar assemblies.

Key Features

• M8x1.25 threaded stud for direct installation into standard tapped holes
• Stainless steel construction to AISI 316 and AISI 303 specifications for corrosion resistance
• Electrolytic polish handle finish with bright body coating
• 20-degree handle arm angle for ergonomic grip positioning
• Adjustable arm style allows repositioning of grip before final tightening
• Compact 17/32-inch hub diameter suits tight mounting clearances

Compatibility

Designed as a direct threaded-stud clamping handle replacement for M8x1.25 tapped mounting points on industrial equipment, machine enclosures, and access panel assemblies.

Installation Notes

Installation requires a tapped M8x1.25 hole in the mating surface. Power down or de-energize any equipment before servicing panels or guards secured by this handle. No special tools are required for hand-tightening; a wrench may be used on the stud base if torque requirements dictate. Follow applicable machinery safety and lockout/tagout procedures during installation or replacement.