Kipp K0108.4161X70 Tension Lever Handle M16x2 Threaded Stud

Product Description

The KIPP K0108.4161X70 is an adjustable tension lever clamping handle with a threaded stud mount, designed for use in industrial clamping, fixturing, and machine adjustment applications. The handle features a steel arm with a ball end and a powder-coated finish, mounted to a steel base with a plastic knob. The stud is M16x2 thread with a 2.75-inch stud length and a 60 mm threaded engagement length. Overall handle length is 5.06 inches, with a hub diameter of 1.61 inches. The arm sits at a 20-degree angle, providing ergonomic positioning for repeated clamping and release cycles. Licensed tradespeople and machine builders install this type of hardware on jigs, fixtures, and industrial equipment.

This handle is suited for use on machine tools, fabrication fixtures, workholding equipment, and general industrial assemblies requiring a positive, tool-free clamping point. The M16x2 threaded stud connects directly to a tapped bore in the workpiece or fixture body. The adjustable tension lever design allows the operator to reposition the handle arm to clear obstructions or optimize hand access in tight setups. Typical environments include manufacturing floors, toolrooms, and maintenance applications where repeated adjustment is required.

Key Features

• M16x2 threaded stud with 2.75-inch stud length and 60 mm threaded engagement
• Adjustable tension lever arm set at 20-degree angle with ball end grip
• Steel handle arm and stud, Grade 5.8 material specification
• Powder-coated finish on both handle arm and body for corrosion resistance
• 1.61-inch hub diameter with 30 mm base diameter and 41 mm body diameter
• Plastic knob, 32 mm diameter, integrated into the clamping assembly

Compatibility

Designed as a direct-mount clamping handle for applications with a tapped M16x2 bore. Suitable for use on industrial fixtures, jigs, machine tables, and fabrication equipment requiring a threaded stud tension lever handle.

Installation Notes

Installation is performed by threading the stud directly into a tapped M16x2 hole in the fixture or equipment body. De-energize and lock out any machinery before servicing or replacing clamping hardware per applicable safety procedures. Verify thread engagement depth against the 60 mm threaded length to ensure full engagement without bottoming. The handle arm angle is adjustable - set it to clear obstructions before final tightening.