Kipp K0108.1101X30 Tension Lever Handle M10x1.5 Steel

Product Description

The KIPP K0108.1101X30 is an adjustable tension lever clamping handle with a threaded stud mount designed for use in machine tool, fixture, and industrial equipment applications. The handle features a steel arm with a powder-coated black finish and a plastic ball-end knob, providing a secure grip during clamping and adjustment operations. The stud is M10x1.5 thread with a 1.18-inch stud length, and the overall handle length reaches 3.46 inches. The arm is angled at 20 degrees from the base, allowing repositioning to clear obstructions during tightening. Grade 5.8 steel construction provides reliable holding strength in repetitive-use industrial environments.

This handle is suited for use on machinery, jigs, fixtures, work-holding devices, and equipment panels where a quick-adjust or lock-down lever is required. The threaded stud configuration allows direct installation into tapped holes on machine frames, mounting plates, and fixture bodies. Common install scenarios include CNC workholding setups, conveyor adjustment points, and general fabrication equipment where operators need to frequently reposition or lock components by hand. The 88 mm handle radius delivers sufficient torque for most hand-tightening applications without requiring additional tooling.

Key Features

• M10x1.5 threaded stud with 1.18-inch (30 mm) stud length for direct installation into tapped holes
• Adjustable tension lever arm allows repositioning at 20-degree increments to clear obstacles
• Grade 5.8 steel handle and stud construction for high-cycle industrial use
• Powder-coated black finish on both handle arm and body for corrosion resistance
• Ball-end plastic knob for comfortable hand grip during clamping
• 88 mm handle radius length provides effective hand-tightening leverage

Compatibility

Designed as a standard threaded-stud clamping handle for any machine, fixture, or equipment panel with an M10x1.5 tapped hole requiring a hand-adjustable lever lock.

Installation Notes

Installation is performed by threading the stud directly into a prepared M10x1.5 tapped hole by hand or with a wrench applied to the hex base. De-energize or lock out any machine before servicing or replacing clamping hardware per applicable safety procedures. Verify thread engagement depth against the 1.18-inch stud length to ensure full thread engagement before applying clamping load. Overtightening beyond hand-tight plus a partial turn may damage plastic knob components or the mating threads.