Kidde - Edwards 701U 6 Inch Detector Base for 711U

Product Description

The KIDDE - EDWARDS 701U is a 6-inch detector base designed for use with the 711U detector head. It provides a stable, secure mounting point for the detector and features three terminal connectors for field wiring. This base is installed as part of a life-safety detection system, typically in commercial or light commercial buildings. Installation is performed by licensed fire alarm or low-voltage electricians working within the scope of the detection system layout. The 701U is sold as a single unit and serves as a foundational component for completing a compliant detector installation.

The 701U base is intended for pairing with the 711U series detector head. It is suited for ceiling-mount installation in commercial detection applications where a 6-inch base footprint is required. The three-terminal connector configuration supports standard wiring configurations used in conventional or addressable detection circuits. Installers working on new construction or system retrofits will find this base compatible with standard ceiling grid and drywall ceiling installations typical in commercial environments.

Key Features

• 6-inch base diameter provides a standard footprint for ceiling-mount detector installations
• Three terminal connectors support field wiring connections for detection circuits
• Designed specifically for use with the 711U detector head
• Sold as a single unit for targeted replacement or new installation use

Compatibility

Designed for use with the KIDDE - EDWARDS 711U detector head. No additional compatible model numbers were specified in the product data.

Installation Notes

Installation should be performed by a licensed fire alarm technician or low-voltage electrician in accordance with NFPA 72 and all applicable local codes. De-energize the detection circuit before making any wiring connections at the base terminals. Verify correct terminal assignments per the system wiring diagram before securing the detector head. Do not overtighten the base mounting hardware, as this may damage the housing or distort ceiling surfaces.