Kichler 6t1100s30wh Led Tape Light 30W 3000K White

Product Description

The KICHLER 6t1100s30wh is a 100-foot roll of flexible LED tape light designed for low-voltage accent, cove, and task lighting applications. Running on 24 volts DC, the tape draws 30 watts total and delivers 125 lumens per segment at a warm 3000K color temperature with a 90 CRI output that renders colors accurately. The integrated LED source is rated for 50,000 hours of average service life. The white polycarbonate housing keeps the profile compact, and the tape is fully dimmable, making it well suited for installations where light level control is required. Licensed electricians and lighting contractors are the typical installers for this product.

This tape light is built for residential and light commercial interior installations including under-cabinet lighting, toe-kick illumination, cove lighting, display case accents, and architectural detail work. The 100-foot continuous roll length allows for longer continuous runs before a splice or power feed is needed. The 3000K warm white output blends well with incandescent and halogen sources in mixed-lighting environments. The 24-volt DC operating voltage requires a compatible constant-voltage LED driver, which is sold separately.

Key Features

• 24-volt DC low-voltage operation for safe, code-friendly installation
• 3000K warm white color temperature with 90 CRI for accurate color rendering
• Fully dimmable with a compatible 0-10V or PWM LED dimmer
• 50,000-hour rated LED lifespan reduces maintenance intervals
• Compact profile: 1200 inches long, 0.5 inches wide, 1.2 mm height
• White finish housing blends into light-colored substrates and trim

Compatibility

Designed for use with a compatible 24-volt DC constant-voltage LED driver. Part of the KICHLER 6TL series of LED tape lighting products.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements for low-voltage lighting systems. Power down and de-energize the 24-volt DC driver before making any connections to the tape. Do not cut the tape except at designated cut marks, and ensure all cut ends are properly terminated or capped to prevent shorting. A compatible constant-voltage LED driver sized to the total wattage of the run must be used — do not connect this tape directly to line voltage.