Keo 938-000-013 Shell End Mill 2 in 10-flute Hss Finisher

Product Description

The KEO 938-000-013 is a 2-inch diameter, 10-flute shell end mill designed for finishing operations in ferrous and non-ferrous materials. Manufactured from high speed steel (HSS), this uncoated tool mounts on a 3/4-inch arbor hole and delivers clean, precise surface finishes when used in milling machines and machining centers. With a 1-3/8-inch length of cut and a right-hand spiral flute geometry, it generates smooth chip evacuation during light finishing passes. This tool is suited for machinists and toolmakers requiring consistent surface finish quality on flat or stepped workpiece profiles.

The 938-000-013 is intended for finishing-stage milling where low stock removal and fine surface finish are the priority. It is commonly used in job shops, production machining environments, and tool rooms on vertical mills and horizontal spindles. The shell-mount design requires an arbor, making it a practical choice for shops that run multiple cutter sizes on a shared arbor system. Right-hand cut and right-hand spiral flute orientation are standard for conventional milling setups.

Key Features

• 2-inch mill diameter for wide finishing passes on flat surfaces
• 10-flute configuration improves surface finish and feed-per-tooth efficiency
• High speed steel construction provides toughness and regrindability
• Uncoated finish suitable for use with cutting fluids on a broad range of materials
• Right-hand cut with right-hand spiral flute for standard milling setups
• 3/4-inch arbor hole with 1-3/8-inch length of cut for shell mill arbor compatibility

Compatibility

Designed for use with standard shell mill arbors accepting a 3/4-inch arbor hole. Compatible with vertical and horizontal milling machines configured for right-hand cutting tools.

Installation Notes

Installation is performed by a machinist or toolroom technician using a shell mill arbor and appropriate draw bolt. Ensure the milling machine spindle is fully stopped and locked before mounting or removing the cutter. Inspect the arbor bore and cutter mounting surfaces for chips or burrs before assembly. Follow the machine manufacturer torque guidelines for the arbor draw bolt and verify cutter runout before beginning a finishing pass.