Kennametal 7093178 Dcgt Turning Insert 3/8 Ic KCU10B

Product Description

The KENNAMETAL 7093178 is a DCGT-style carbide turning insert designed for precision external turning and finishing operations on CNC lathes and turning centers. This insert features a diamond shape with a 55-degree included angle, a 7-degree relief angle, and a 0.004-inch (0.10 mm) corner radius suited to fine-finish and light-stock-removal applications. The KCU10B grade is paired with an AlTiN coating, making this insert well-matched for machining non-ferrous materials, hardened steels, and exotic alloys. Installation and selection are performed by machinists and CNC programmers specifying tooling for precision turning applications.

The 7093178 is appropriate for light finishing passes on CNC turning centers where tight tolerances and low surface roughness are required. The neutral hand orientation allows use in standard toolholders accepting DCGT inserts. The LF chip breaker geometry supports controlled chip formation during finishing cuts at lower depths of cut and feed rates. This insert is sold individually and must be ordered in multiples of 5 per minimum order requirement.

Key Features

• DCGT insert style with diamond shape and 55-degree included angle for sharp, pointed cutting action
• KCU10B grade with AlTiN coating for heat and wear resistance on non-ferrous and hard materials
• 0.004-inch (0.10 mm) corner radius for fine-finish and close-tolerance turning
• LF chip breaker geometry for controlled chip formation during light finishing passes
• Neutral hand orientation compatible with standard DCGT toolholders
• 2 cutting edges per insert

Compatibility

Designed for use in toolholders accepting DCGT-style turning inserts with a 3/8-inch inscribed circle. Consult toolholder manufacturer specifications to confirm seat and clamp compatibility before installation.

Installation Notes

Insert seating and clamping should be performed by a qualified machinist following the toolholder manufacturer's torque and clamping procedures. Power down and lock out the machine before changing inserts. Inspect the toolholder pocket and clamping screw for wear or damage before seating the new insert. Handle carbide inserts with care to avoid chipping cutting edges.